SS316L Water Preparation Mixer Liquid Mixing Tank for Injection Solution

Product Description

SS316L Pharmaceutical Water Preparation Mixer Liquid Mixing Tank For Injection Solution
 

SS316L Pharmaceutical Water Preparation Mixer Liquid Mixing Tank For Injection Solution standard for the pharmaceutical solution in FDA stadanrd is used to WFI water with Pharmaceutical  APIs  together according to the technological proportions. Which can be used in the infusion water ,injection solution etc ,the tank is designed company with CIP/SIP system ,can be PLC automatic control the whole production process . 

The structure and configuration of stainless steel pharmaceutical IV infustion solution injection solution mixing tank  for the pharmaceutical solution in FDA stadanrd can be standardized and humanized according to the requirements of production process. In the mixing process, it can realize the feed control, discharge control, mixing control and other manual and automatic control.

SS316L Pharmaceutical Water Preparation Mixer Liquid Mixing Tank For Injection Solution is composed of mixing tank body, upper and lower heads, agitator, support, transmission device, shaft seal device, etc. heating device or cooling device or metering device can also be configured according to process requirements.

SS316L Pharmaceutical Water Preparation Mixer Liquid Mixing Tank For Injection Solution can be used for the low viscosity solution like infusion solution ,injection solution ,eyedrop solution ,syrup solution ,oral liquid etc

SS316L Pharmaceutical Water Preparation Mixer Liquid Mixing Tank For Injection Solution Nozzle configuration:
The process nozzles mainly include manholes, inlets, outlets, sight glass, sight lights, vent filter, CIP (equipped with sanitary universal cleaning balls), SIP ports, sterile sampling ports, thermometers, temperature sensors, jacket inlets and outlets.(Nozzle size and opening position shall be provided according to process requirements.)

SS316L Pharmaceutical Water Preparation Mixer Liquid Mixing Tank For Injection Solution Characteristic:
1) Volume we can produce from 50L ---20000L.
2) Contact Product Material  is SS316L.Non-Contact part material is SS304  etc.
3) Jacket can be used different type : single full jacket ,limpet coil jacket and dimple type jacket.
4) Jacket can be used for heating and cooling .
5)Heating medium is steam or hot water or electrical 
6)cooling medium is chiller or tap water 
7) agitator type :can be top mounted propeller type agitator or bottom mounted magnetic agitator 
8) Insulation material can use mineral wool ,rock wool ,PUF etc.
9) Tank can be equipped with manhole ,CIP spray ball ,vent filter level sensor ,temperature sensor ,pressure sensor ,load cell ,PH sensor ,PO2 sensor ,safety valve,sampling valve etc.
10) Tank can be CIP/SIP online.
11) control panel :PLC /HMI automatic control or common button control .
12) inside shell mirror polish Ra<0.4um ,outside shell polish Ra<0.8um.

 

Components Item	Function and usage
CIP spray ball	Wash &clean tank inside surface and devices automatic ,which should connect to the CIP machine station
Vent filter	Filter air to prevent the bacteria into the tank ,also can release the tank inside pressure.
Temperature sensor (gauge)	Indicate inside tank temperature and PID temperature control with the necessary valve and fittings
Pressure sensor (gauge)	Indicate the inside tank pressure
PH sensor	Indicate the product PH data
PO2 sensor	Indicate the product Oxygen content
Level sensor (gauge)	Indicate the inside tank product level height ,there are have different models :(static) pressure type ,ultrasonic type ,radar type ,glass tube type ,plate sight glass type .
Load cell	Indicate the product weight
VFD ( inverter )	Control and adjust agitator speed
Safety valve	Release inside tank pressure to protect the tank safety
Flow meter	Indicate the solution inlet and outlet volume
Sight light	Indicate inside tank bright for watching easily
Manhole (handhole )	Charge solid product into tank ,also can be used for maintenance inside tank components.
Sampling valve	Take inside tank products sample for offline checking

 

Technology data for stainless steel pharmaceutical IV infustion solution injection solution mixing tank in two different type agitator system :

Model	BT-50	BT-100		BT-500		BT-1000		BT-6000
Tank work volume:L	50	100		500		1000		6000
Motor power for bottom mounted magnetic agitator :Kw	0.18	0.37		1.1		2.2		5.5
Agitator speed for bottom mounted magnetic agitator :RPM	0-350 ( for the gear motor connection type ),0-600 (for direct motor connection type )
Motor power for top mounted propeller type agitator :Kw	0.37		0.55		1.1		1.5		7.5
Agitator speed for top mounted propeller type agitator :RPM	0-150
Inside shell pressure MPa	-0.1/0.3 (can be done as client's URS)
Jacket pressure MPa	0.3 (can be done as client's URS)