1000 liter SS316L Stainless Steel Pharmaceutical Liquid Horizontal storage tank
1000 liter SS316L Stainless Steel Pharmaceutical Liquid Horizontal storage tank is used to storage the WFI water ( injection water ).in a controlled temperature and keep there for using ,the tank is in aspetic status ,which can be online CIP and SIP .
1000 liter SS316L Stainless Steel Pharmaceutical Liquid Horizontal storage tank is made of stainless steel material , which contact product part is SS316L ,non -contact part is SS304 .WFI storage tank strcture can be divided into tank shell ,tank end , manhole, tank CIP spray ball, ,vent filter ,feed port and discharge port etc. The tank shell is polished inside surface as Ra<0.45um, and outside surface as Ra<0.8um. The liquid level sensor is used to observe the storage capacity in the tank. The tank CIP spray ball is used to clean the inside shell of tank.
The manhole can be used for maintenance, plus two feed inlets, which can be connected by pipes at the same time. There is a water outlet below, which can be installed with a valve, and the water can be discharged manually, and it will be closed after the water is discharged.
Characteristic of 1000 liter SS316L Stainless Steel Pharmaceutical Liquid Horizontal storage tank:
1) .vertical type and horizontal type .
2) Single layer ,double jacketed layers.
3) Quick open type manhole.
4) 360 degree CIP spray ball ,CIP/SIP online.
5) level sensor to indicate the inside WFI level .
6) Temperature sensor (gauge ) to indicator the temperature data.
7) Contact product Material is SS316L.
8) jacket can be heating by steam or hot water or electrical
9)Volume from 50L ---100000L.
1000 liter SS316L Stainless Steel Pharmaceutical Liquid Horizontal storage tank technology data specification :
Model Item |
ZCG500 |
ZCG1000 |
ZCG2000 |
ZCG3000 |
ZCG5000 |
ZCG10000 |
Tank working volume: L |
500 |
1000 |
2000 |
3000 |
5000 |
10000 |
Contact product material |
SS316L |
|
Jacket type |
Limpet coil ( half pipe coil) ,single full jacket |
|
Insulation layer |
PUF ,Rock wool etc |
|
Working pressure Mpa |
inside shell :ATM ; Jacket :2bar |
Working temperature C |
inside shell <100 degree ,jacket <130 degree |
Dimension mm |
Ø900X1700 |
Ø1000X2250 |
Ø1200X2700 |
Ø1500X2900 |
Ø1600X3800 |
Ø2000X4600 |