SS316L Pharmaceutical Water Preparation Mixer Liquid Mixing Tank For Injection Solution
SS316L Pharmaceutical Water Preparation Mixer Liquid Mixing Tank For Injection Solution standard for the pharmaceutical solution in FDA stadanrd is used to WFI water with Pharmaceutical APIs together according to the technological proportions. Which can be used in the infusion water ,injection solution etc ,the tank is designed company with CIP/SIP system ,can be PLC automatic control the whole production process .
The structure and configuration of stainless steel pharmaceutical IV infustion solution injection solution mixing tank for the pharmaceutical solution in FDA stadanrd can be standardized and humanized according to the requirements of production process. In the mixing process, it can realize the feed control, discharge control, mixing control and other manual and automatic control.
SS316L Pharmaceutical Water Preparation Mixer Liquid Mixing Tank For Injection Solution is composed of mixing tank body, upper and lower heads, agitator, support, transmission device, shaft seal device, etc. heating device or cooling device or metering device can also be configured according to process requirements.
SS316L Pharmaceutical Water Preparation Mixer Liquid Mixing Tank For Injection Solution can be used for the low viscosity solution like infusion solution ,injection solution ,eyedrop solution ,syrup solution ,oral liquid etc
SS316L Pharmaceutical Water Preparation Mixer Liquid Mixing Tank For Injection Solution Nozzle configuration:
The process nozzles mainly include manholes, inlets, outlets, sight glass, sight lights, vent filter, CIP (equipped with sanitary universal cleaning balls), SIP ports, sterile sampling ports, thermometers, temperature sensors, jacket inlets and outlets.(Nozzle size and opening position shall be provided according to process requirements.)
SS316L Pharmaceutical Water Preparation Mixer Liquid Mixing Tank For Injection Solution Characteristic:
1) Volume we can produce from 50L ---20000L.
2) Contact Product Material is SS316L.Non-Contact part material is SS304 etc.
3) Jacket can be used different type : single full jacket ,limpet coil jacket and dimple type jacket.
4) Jacket can be used for heating and cooling .
5)Heating medium is steam or hot water or electrical
6)cooling medium is chiller or tap water
7) agitator type :can be top mounted propeller type agitator or bottom mounted magnetic agitator
8) Insulation material can use mineral wool ,rock wool ,PUF etc.
9) Tank can be equipped with manhole ,CIP spray ball ,vent filter level sensor ,temperature sensor ,pressure sensor ,load cell ,PH sensor ,PO2 sensor ,safety valve,sampling valve etc.
10) Tank can be CIP/SIP online.
11) control panel :PLC /HMI automatic control or common button control .
12) inside shell mirror polish Ra<0.4um ,outside shell polish Ra<0.8um.
| Components Item |
Function and usage |
| CIP spray ball |
Wash &clean tank inside surface and devices automatic ,which should connect to the CIP machine station |
| Vent filter |
Filter air to prevent the bacteria into the tank ,also can release the tank inside pressure. |
| Temperature sensor (gauge) |
Indicate inside tank temperature and PID temperature control with the necessary valve and fittings |
| Pressure sensor (gauge) |
Indicate the inside tank pressure |
| PH sensor |
Indicate the product PH data |
| PO2 sensor |
Indicate the product Oxygen content |
| Level sensor (gauge) |
Indicate the inside tank product level height ,there are have different models :(static) pressure type ,ultrasonic type ,radar type ,glass tube type ,plate sight glass type . |
| Load cell |
Indicate the product weight |
| VFD ( inverter ) |
Control and adjust agitator speed |
| Safety valve |
Release inside tank pressure to protect the tank safety |
| Flow meter |
Indicate the solution inlet and outlet volume |
| Sight light |
Indicate inside tank bright for watching easily |
| Manhole (handhole ) |
Charge solid product into tank ,also can be used for maintenance inside tank components. |
| Sampling valve |
Take inside tank products sample for offline checking |
Technology data for stainless steel pharmaceutical IV infustion solution injection solution mixing tank in two different type agitator system :
| Model |
BT-50 |
BT-100 |
BT-500 |
BT-1000 |
BT-6000 |
| Tank work volume:L |
50 |
100 |
500 |
1000 |
6000 |
| Motor power for bottom mounted magnetic agitator :Kw |
0.18 |
0.37 |
1.1 |
2.2 |
5.5 |
| Agitator speed for bottom mounted magnetic agitator :RPM |
0-350 ( for the gear motor connection type ),0-600 (for direct motor connection type ) |
| Motor power for top mounted propeller type agitator :Kw |
0.37 |
0.55 |
1.1 |
1.5 |
7.5 |
| Agitator speed for top mounted propeller type agitator :RPM |
0-150 |
| Inside shell pressure MPa |
-0.1/0.3 (can be done as client's URS) |
| Jacket pressure MPa |
0.3 (can be done as client's URS) |
Audited Supplier 
){kind=link}
){kind=link}