Chinese Suppliers Professional High Speed Mesh Belt Conveyor High Temperature Resistant Conveyor Line

• Material: 304/316L Stainless Steel
• Feature: Heat-Resistant, Easy Operation
• Tensile Strength: Strong
• Product Name: Belt Conveyor
• Applicable in Industries: Packaging Industry
• Size: Customer Size
• Model NO.: BT
• Belt Types: Stainless Steel Chain
• Speed: 60rpm
• Usage: Transport Products
• Function: Transferring Material
• Advantage: Long Working Life
• Transport Package: Export Standard Packaging
• Specification: 50L-20000L
• Trademark: JOSTON
• Origin: Wenzhou, China
• HS Code: 8479820090
• Production Capacity: 30 Sets/Month

Product Description

1.The traction of the belt conveyor is transmitted by the friction between the drive roller and the belt. Therefore, the belt must be tightened with a tensioning device to make the belt have a certain initial tension at the separation of the transfer roller.
2.The tape runs on the rollers together with the cargo. The tape is both a traction mechanism and a load-bearing mechanism. There is no relative movement between the cargo load and the tape, which eliminates the frictional resistance between the tape and the cargo load during operation. Because the roller is equipped with rolling bearings, there is rolling friction between the tape and the roller, so the running resistance is greatly reduced, thereby reducing the power consumption and increasing the transportation distance. For a belt conveyor, the traction transmission capacity is determined by the tension of the belt, the wrapping angle of the belt on the drive roller, and the coefficient of friction between the belt and the drive roller. It is necessary to ensure that the belt of the belt conveyor does not slip on the drive roller and operates normally. In the production practice, corresponding measures must be taken according to different situations. Improving the transmission capacity of traction can start from the following aspects:
1.Increase the tension (initial tension). When the belt conveyor is in operation, the belt will stretch, causing the traction to drop. Therefore, according to the situation, the belt should be properly tightened with a tensioning device to increase the tension of the belt to increase the traction.
2.Increase the coefficient of friction. The specific measures are: protect the wooden lining or rubber liner covered on the transmission drum to increase the friction coefficient, and on the other hand, reduce the amount of water and coal to prevent the friction coefficient from decreasing.
3. Increase the wrap angle. Due to poor working conditions and large traction required for underground belt conveyors, double drum drives are often used to increase the wrap angle.

1. Working environment, conditions and conditions
Need to consider the daily operating time, working frequency, service life of the belt conveyor, feeding and unloading methods.
Working environment and conditions: ambient temperature, open air or indoors, environmental protection requirements, mobile or fixed, telescopic requirements.
2. Problems with transmission lines and conveyor belts
The size of the transmission line needs to be considered in detail, including: inclination angle, maximum length, lifting height; straight line section, curve section size; connection size, etc.
Conveyor belt: maximum sag requirement, simulated friction resistance coefficient, friction coefficient, safety factor.
3. The nature of the material and the conveying volume
The specific properties of the material need to be considered, including: loose density, angle of repose, particle size of the material, maximum lumpiness, humidity of the material, abrasiveness, cohesiveness and friction coefficient of the material. Conveying volume, the conveying volume that can be directly reached when the material flow is uniform, and the basic statistical data of the material flow can be considered when the material flow is uneven.


composition
The complete belt conveyor should include the following parts (but not limited to):
(1) Adhesive tape
(2) Roller group
(3) Roller group
(4) Drive device (including motor, reducer, mechanical coupling, drive device base, etc.)
(5) Disc brake
(6) Backstop
(7) Tensioning device
(8) Guide trough
(9) Belt cleaner
(10) Steel structure parts such as intermediate frame, outrigger, roller support, receiving plate, safety shield, guardrail, etc.
(11) Coatings and solvents for on-site touch-up, oils and lubricants for trial operation
(12) All consumables and wearing parts required during installation, commissioning and trial operation
(13) Equipment installation, maintenance, inspection and operation special tools, instruments, debugging instruments and meters

 

 

 

 

 

 

 

SERVICE

We have established some overseas agent office to make the after-sales serivce already ,so it can will be service client in fast response .also in our headquarter service team ,there is a expert team which can support client in 7*24 hours .
1. Customer inquiry and consultation (URS documents)
2. Confirmation of treatment plan (DQ documents &PID Drawing)
3.Quotation offer with the technolgy document (Quotation PI )
4.Engineering and Manufacturing (Prodcution &Quality inspection )
5. Product inspection (FAT documents)
6. Delivery arrangement and loading work (full set Shipment documents)
7. After-sales service (OQ,PQ ,SAT documents)


FAQ

1.What about your factory?
Our factory is located in Wenzhou city ,Zhejiang Province and have more than 15 years experience on machinery making.

2.How will your company  control the equipment quality ?
We have a qualified expert team ,we will inspect every production proceed .also Machines will be tested in our plant before shipment .

3.How long the warranty will be?
We provide 1 years warranty for the machine running ,but we will afford whole -life service for the machine .

4.Which kind payment do your company do now ?
We accept Western Union, T/T ,D/P,D/C and irrevocable L/C payable etc.

5.Can  we  become  your distributor in our country?
Yes, we very welcome you! More details will be discussed if you are interested in being our agent.

6.Why we choose "JOSTON "?
1. We enhance the reliability of product's quality and working life . 
2. We decrease the consumption cost of the product in the ruuning. 
3. We improve research personnel's ability to deliver a creative design; 
4. We use leading technologies in our product development and innovation, and thereby increase the competitive advantage of products.

7.Do you supply installation equipment in oversea?
Yes, if need, we can  send our  engineer to your plant to help you do installation and commission.

8.How can we know the order production status ?
We will arrange the person to take photo or video during manufacturing in every  week to make you to know the production status.When goods are finished,we will take  detailed photos or video for your checking ,after approve ,then we will arrange shipment .also you can arrange FAT in our plant when the goods is ready here

9.what is kind service do you offer before making order ?
1.according to your company URS ,we will make the design  drawing accoridingly.
2.after your company approved drawing ,we will make quotation.
3. final we make agreement on payment terms ,delivery time ,package ,shipment etc.

10.how about your company after-sale serivce ?
1. We provide long-term after-sale service. 
2. we can do installation and commission for the equipment in your plant if necessary .
3. Meanwhile, you can call or e-mail us to consult on any relevant question since we have a special line for after-sale service. Alternatively, you can communicate on-line with us to solve any problem.