Jam Evaporator Ball Type Vacuum Concentrator Beverage Concentrating Tank

• After-sales Service: Online Support/Visit Client′s Plant Site
• Warranty: 1 Year
• Condition: New
• Customized: Customized
• Voltage: 110V/220V/380V/440V/480V/575V,50-60Hz
• Composition: Evaporation Equipment
• Model NO.: NZ
• Processing Material: Natural Ingredients
• Process: Concentration and Dry
• Product Name: Ball Type Vacuum Concentrator
• Funtion: Remove Water/Solvent From The Food Raw Material
• Feeding: Extractor Solution /Low Solid Content Solution
• Output: Semi-Solid/Ointment
• Heating/Cooling Moodel: Steam/Hot Oil/Hot Water/Electrical
• OEM: Parameter Customization
• Related Words: Centrifugal Vacuum Concentrator
• Key Selling Point: Automatic
• Material: 304/316L Stainless Steel
• Applicable Industries: Manufacturing Plant
• Transport Package: Wooden Case Packaging/According to Customer
• Specification: 100-10000L
• Trademark: JOSTON
• Origin: Wenzhou, China
• HS Code: 8419899090
• Production Capacity: 30 Sets/Month

Product Description

Ball Type Low Temperature Vacuum Evaporator Concentrator Machine  is mainly used for heat sensitive material low temperature vacuum concentration,also used for recovery the solvent from the raw material solution.which can be used in the herbal extractor solution ,food ,dairy and juice field etc. 

Ball Type Low Temperature Vacuum Evaporator Concentrator Machine  operates under negative pressure. It is necessary to seal the equipment, often to condense the secondary steam through the condenser and then discharge it, so that the secondary steam in the evaporator becomes negative pressure. At this time, the boiling point of the solution is lower than that under normal pressure, the effective heat transfer temperature difference between the heating steam and the secondary steam stamp can be increased, and the production intensity of the evaporator can be increased. The heating steam of decompression evaporation can use low-pressure steam or waste gas as heat source, and the heat loss of the system in operation is also small, so it is widely used.

Ball Type Low Temperature Vacuum Evaporator Concentrator Machine  features :
1. The Vacuum concentrator adopts decompression concentration, so the concentration time is short, and the effective composition of heat sensitive materials will not be damaged.
2. The Vacuum concentrator is made of 304 or 316L stainless steel, with good corrosion resistance and durability.
3. Vacuum concentrator is equipped with automatic spray cleaning system, which is convenient for cleaning.
4. Simple and convenient operation, only one person, small floor area and low noise, especially suitable for small-scale test or small-scale material liquid concentration.
5. Vacuum concentrator has strong universality, which can be used for evaporation and concentration of various materials, realizing multi-purpose of one machine.

Vacuum concentrator including the following unit : concentrator tank ,condenser ,sub-cooler ,water/gas separator ,collection tank and pipeline .

 

Model Item	NZ-100	NZ-300	NZ-500	NZ-1000	NZ-2000
Concentrator tank volume:L	100	300	500	1000	2000
Evaporate capacity kg/h	30	60	100	160	350
evaporated temperature C	<60
Vacuum degree MPa	-0.08--- -0.09
Concentrator tank jacket heating area M2	0.8	1.3	1.5	2.5	5.5
Condenser cooling area M2	2.5	4.5	6	10	20
Sub-cooler cooling area M2	0.5	0.5	0.5	1.0	2
Steam consumption kg/h	35	70	115	180	400
Cooling water consumption T/H	3	5	7	12	25

 

SERVICE

We have established some overseas agent office to make the after-sales serivce already ,so it can will be service client in fast response .also in our headquarter service team ,there is a expert team which can support client in 7*24 hours .
1. Customer inquiry and consultation (URS documents)
2. Confirmation of treatment plan (DQ documents &PID Drawing)
3.Quotation offer with the technolgy document (Quotation PI )
4.Engineering and Manufacturing (Prodcution &Quality inspection )
5. Product inspection (FAT documents)
6. Delivery arrangement and loading work (full set Shipment documents)
7. After-sales service (OQ,PQ ,SAT documents)


FAQ

1.What about your factory?
Our factory is located in Wenzhou city ,Zhejiang Province and have more than 15 years experience on machinery making.

2.How will your company  control the equipment quality ?
We have a qualified expert team ,we will inspect every production proceed .also Machines will be tested in our plant before shipment .

3.How long the warranty will be?
We provide 1 years warranty for the machine running ,but we will afford whole -life service for the machine .

4.Which kind payment do your company do now ?
We accept Western Union, T/T ,D/P,D/C and irrevocable L/C payable etc.

5.Can  we  become  your distributor in our country?
Yes, we very welcome you! More details will be discussed if you are interested in being our agent.

6.Why we choose "JOSTON "?
1. We enhance the reliability of product's quality and working life . 
2. We decrease the consumption cost of the product in the ruuning. 
3. We improve research personnel's ability to deliver a creative design; 
4. We use leading technologies in our product development and innovation, and thereby increase the competitive advantage of products.

7.Do you supply installation equipment in oversea?
Yes, if need, we can  send our  engineer to your plant to help you do installation and commission.

8.How can we know the order production status ?
We will arrange the person to take photo or video during manufacturing in every  week to make you to know the production status.When goods are finished,we will take  detailed photos or video for your checking ,after approve ,then we will arrange shipment .also you can arrange FAT in our plant when the goods is ready here

9.what is kind service do you offer before making order ?
1.according to your company URS ,we will make the design  drawing accoridingly.
2.after your company approved drawing ,we will make quotation.
3. final we make agreement on payment terms ,delivery time ,package ,shipment etc.

10.how about your company after-sale serivce ?
1. We provide long-term after-sale service. 
2. we can do installation and commission for the equipment in your plant if necessary .
3. Meanwhile, you can call or e-mail us to consult on any relevant question since we have a special line for after-sale service. Alternatively, you can communicate on-line with us to solve any problem.