Instant Type Uht Sterlizer equipment is used in/for instantly sterilizing the fresh milk, fruit drink,Beverage, ice-cream, sauce, soybean milk, condensed milk, alcohol and other Liquids of food and drinks; and some other fluids pharmacy.
working principle:
Generally, materials are preheated by centrifugal pump into the hot and cold material heat exchange device in the sterilizer, and then through the high-temperature barrel full of high pressure, materials are rapidly heated to the sterilization temperature and kept for about 3 seconds before and after this, in which microorganisms and enzymes are quickly killed. After the material is discharged from the high-temperature barrel, it is cooled by heat exchange with the cold material, and the general temperature is lower than 65 ºC. If the temperature needs to be increased in the next process, the requirements can be achieved by adjusting angle stop valve or circulation, otherwise, the discharge temperature can be reduced by connecting cooling water. The discharging is controlled by a throttle valve, which can make the boiling point of the material higher than the maximum temperature under a certain pressure. During normal production, the valve is adjusted, and the pump driving force overcomes the spring pressure to produce back pressure to control the flow. When cleaning the sterilizer, all valves shall be opened. The circulation storage tank can be used to prepare acid and alkali solution to effectively clean the fouling on the inner wall of the coil. Due to the use of stainless steel three-way cock, the flow can be properly adjusted.
Characteristic:
1. Continuous production, very short sterilization time.
2. High quality products can be obtained due to short heating time.
3. Due to the use of ultra-high temperature sterilization, the sterilization effect is very good.
4. It can be used in series with centrifugal pump or high-pressure homogenizer, which has a wide range of applications and is suitable for the sterilization of high viscosity materials.
5. Because the heat exchanger with cold and hot materials is designed to have the economic effect of waste heat utilization, the steam consumption is small.
Cleaning of equipment:
CIP is adopted for this equipment. Do not disassemble the parts during cleaning. The purpose of cleaning is to remove the scale on the wall of the heat exchange coil, so as to improve the heat exchange effect and equipment capacity. In general, it must be cleaned once for 6-8 hours in continuous use. In special circumstances, if the production capacity is significantly reduced, it should be cleaned immediately.
Main technical features for Instant Type Uht Sterlizer equipment:
1. Capacity: 1~5KL/h
2. Sterilizing temperature:115~135ºC
3. Steam pressure:<0.78Mpa(8kg/c m2)
4. Heating time: =6S
5. Discharging temperature: <65ºC
6. Quantity of stem consumption: <0.15kg/L material
7. Tight structure, occupy small space
8. Easy to clean, wash by CIP chemical washer
9. Safety and operate easily
SERVICE
We have established some overseas agent office to make the after-sales serivce already ,so it can will be service client in fast response .also in our headquarter service team ,there is a expert team which can support client in 7*24 hours .
1. Customer inquiry and consultation (URS documents)
2. Confirmation of treatment plan (DQ documents &PID Drawing)
3.Quotation offer with the technolgy document (Quotation PI )
4.Engineering and Manufacturing (Prodcution &Quality inspection )
5. Product inspection (FAT documents)
6. Delivery arrangement and loading work (full set Shipment documents)
7. After-sales service (OQ,PQ ,SAT documents)
FAQ
1.What about your factory?
Our factory is located in Wenzhou city ,Zhejiang Province and have more than 15 years experience on machinery making.
2.How will your company control the equipment quality ?
We have a qualified expert team ,we will inspect every production proceed .also Machines will be tested in our plant before shipment .
3.How long the warranty will be?
We provide 1 years warranty for the machine running ,but we will afford whole -life service for the machine .
4.Which kind payment do your company do now ?
We accept Western Union, T/T ,D/P,D/C and irrevocable L/C payable etc.
5.Can we become your distributor in our country?
Yes, we very welcome you! More details will be discussed if you are interested in being our agent.
6.Why we choose "JOSTON "?
1. We enhance the reliability of product's quality and working life .
2. We decrease the consumption cost of the product in the ruuning.
3. We improve research personnel's ability to deliver a creative design;
4. We use leading technologies in our product development and innovation, and thereby increase the competitive advantage of products.
7.Do you supply installation equipment in oversea?
Yes, if need, we can send our engineer to your plant to help you do installation and commission.
8.How can we know the order production status ?
We will arrange the person to take photo or video during manufacturing in every week to make you to know the production status.When goods are finished,we will take detailed photos or video for your checking ,after approve ,then we will arrange shipment .also you can arrange FAT in our plant when the goods is ready here
9.what is kind service do you offer before making order ?
1.according to your company URS ,we will make the design drawing accoridingly.
2.after your company approved drawing ,we will make quotation.
3. final we make agreement on payment terms ,delivery time ,package ,shipment etc.
10.how about your company after-sale serivce ?
1. We provide long-term after-sale service.
2. we can do installation and commission for the equipment in your plant if necessary .
3. Meanwhile, you can call or e-mail us to consult on any relevant question since we have a special line for after-sale service. Alternatively, you can communicate on-line with us to solve any problem.
Audited Supplier 
){kind=link}