High Quality FDA Stainless Steel Mixing Tank with Bottom Magnetic Stirrer
High Quality FDA Stainless Steel Mixing Tank with Bottom Magnetic Stirrer is the magnetic agitator which equipped in the bottom end of the tank .as the strcture difference ,the bottom magnetic agitator will used the direct motor connection ,the speed can adjust from -600RPM ;also can use the gear motor to connection ,the speed can adjust from -350RPM.
Advantages of High Quality FDA Stainless Steel Mixing Tank with Bottom Magnetic Stirrer :
1.The static sealing structure is adopted without leakage; the equipment operates stably, has a long service life, and is safe and sanitary. It is not only used in the medium with high hygiene requirements, but also used in the medium with high hazard and the occasion with high pressure requirements. The magnetic stirrer is installed at the bottom of the tank body, so it can be fully stirred when there is less material.
2.magnetic stirrer is installed at the bottom of the tank body to stir the materials in the tank. The difference between the magnetic mixing tank and the ordinary mixing tank is that the stainless steel magnetic mixing tank gives up the packing seal or the mechanical seal, and the variable seal is changed into the static seal. The mixing parts in the tank are completely rotated in the static seal chamber of the tank, and do not extend out of the outside of the tank. The leakage problem that the dynamic seal cannot overcome is completely solved. The mixing materials are completely in the closed state without any leakage Leakage and pollution.
Characteristic for the High Quality FDA Stainless Steel Mixing Tank with Bottom Magnetic Stirrer :
1) Volume we can produce from 5L ---50000L.
2) Material we can use SS304 and SS316L. etc.
3) it can used in single layer or double jacket layers according to production process.
4) Jacket can be used different type : single full jacket ,limpet coil jacket and dimple type jacket.
5) Jacket can be used for heating and cooling as the required production process.
6) Insulation material can use mineral wool ,rock wool ,PUF etc.
7) Bottom mounted agitator like magnetic agitator
8) Tank can be equipped with fittings :manhole ,CIP spray ball ,vent filter, level sensor ,temperature sensor ,pressure sensor ,load cell ,PH sensor ,PO2 sensor ,safety valve,sampling valve etc.as the production process requirement
9) Tank can be CIP/SIP online
10)control panel : PLC/HMI automatic control or common simple button control .
11) inside shell mirror polish Ra<0.4um ,outside shell polish Ra<0.8um
| Components Item |
Function and usage |
| CIP spray ball |
Wash &clean tank inside surface and devices automatic ,which should connect to the CIP machine station |
| Vent filter |
Filter air to prevent the bacteria into the tank ,also can release the tank inside pressure. |
| Temperature sensor (gauge) |
Indicate inside tank temperature and PID temperature control with the necessary valve and fittings |
| Pressure sensor (gauge) |
Indicate the inside tank pressure |
| PH sensor |
Indicate the product PH data |
| PO2 sensor |
Indicate the product Oxygen content |
| Level sensor (gauge) |
Indicate the inside tank product level height ,there are have different models :(static) pressure type ,ultrasonic type ,radar type ,glass tube type ,plate sight glass type . |
| Load cell |
Indicate the product weight |
| VFD ( inverter ) |
Control and adjust agitator speed |
| Safety valve |
Release inside tank pressure to protect the tank safety |
| Flow meter |
Indicate the solution inlet and outlet volume |
| Sight light |
Indicate inside tank bright for watching easily |
| Manhole (handhole ) |
Charge solid product into tank ,also can be used for maintenance inside tank components. |
| Sampling valve |
Take inside tank products sample for offline checking |
Audited Supplier 
){kind=link}
){kind=link}