Stainless Steel Air Operated Driven Pneumatic Diaphragm Membrane Pump

• After-sales Service: 2 Years
• Warranty: Online Support/Visit Client′s Plant Site
• Certification: ISO9001:2008, ISO9001:2000, CE
• Material: Stainless Steel
• Power: Pneumatic
• Valve Body Type: Diaphragm
• Model NO.: GMB
• Function: Intelligent Type
• Diaphragm Material: FPM
• Performance: Corrosion
• Applicable in Industries: Pharmaceutical, Water, Food, Dairy, Wine, Beer
• Transport Package: Export Standard Package
• Specification: 1-50 T/H
• Trademark: JOSTON
• Origin: Wenzhou, China
• HS Code: 8421991000
• Production Capacity: 200 Sets/Month

Product Description

 

pneumatic diaphragm pump due to without electrical motor ,so it can be used in the explosion-proof room which have restricted with the electrical .
also it without the mechanical seal ,so it can be working under the solution transfer which is not continous flow .

Working principle:

In the two symmetrical working chambers of the diaphragm pump, each is equipped with an elastic diaphragm, and the coupling rod forms the two diaphragms into a whole. After the compressed air enters the air distribution valve from the air inlet joint of the pump, the diaphragm in the two working chambers is pushed to drive the two diaphragms connected by the coupling rod to move synchronously. At the same time, the gas in the other working chamber is discharged out of the pump from the back of the diaphragm. Once the end of the trip is reached. The air distribution mechanism automatically introduces the compressed air into another working chamber and pushes the diaphragm to move in the opposite direction, thus forming the synchronous reciprocating motion of the two diaphragms. Each working chamber is equipped with two one-way ball valves. The reciprocating motion of the diaphragm changes the volume of the working chamber, forcing the two one-way ball valves to open and close alternately, so as to continuously suck and discharge the liquid.

Performance characteristic :
1. There is no need for irrigation and water diversion. The suction head is up to 5m, the lift is up to 50m, and the outlet pressure is ≥ 6kgf / C ;
2. The flow is spacious and the passing performance is good. The maximum particle diameter allowed to pass is up to 10 mm. When pumping mud and impurities, there is little wear on the pump;
3. The head and flow can be adjusted steplessly through the opening of the air valve (the air pressure can be adjusted between 1-7 bar):
4. The pump has no rotating parts, shaft seal, diaphragm j| and other pumped media are completely separated from the moving parts and workpiece media of the pump, and the transmitted media will not leak out. Therefore, when toxic, easy to play or corrosive media are pumped, environmental pollution and personal safety will not be caused;
5. No need to use electricity. It is safe and reliable to use in inflammable and explosive places;
6. It can work in the medium:
7. It is convenient to use, reliable to work, and it only needs to open and close the gas valve to start and stop. Even if there is no medium operation for a long time due to an accident or the pump stops suddenly, it will not be damaged. Once it is overloaded, the pump will stop automatically, with self-protection performance. When the load returns to normal, it can start and run automatically;
8. The pump has simple structure, few wearing parts, simple structure, convenient installation and maintenance. The medium transported by the pump will not contact with the moving parts such as the valve and the connecting rod. Unlike other types of pumps, the performance of the pump will gradually decline due to the wear of the rotor, piston, gear, blade and other parts:
9. It can transport viscous liquid (viscosity is below 10000 centipoise):
10. This pump does not need oil lubrication, even if it is idle, it has no effect on the pump, which is the biggest feature of this pump

Max working pressure	120psi (0.84Mpa,8bar)
Max flow rate	150 gpm (568 lpm)
Max reciprocating speed	145 cpm
Max suction height	5m
Max permitted grain	0.24in (6 mm)
Max air consumption	140 scfm(70L/s)
Air inlet size	1/2 in.npt
Air outlet size	3/4 in.npt
Fliud inlet size	2 in.
Fliud outlet size	2 in.
Weight	Aluminum alloy pump 29kg;SS pump 47kg

SERVICE

We have established some overseas agent office to make the after-sales service already ,so it can will be service client in fast response .also in our headquarter service team ,there is a expert team which can support client in 7*24 hours .
1. Customer inquiry and consultation (URS documents)
2. Confirmation of treatment plan (DQ documents &PID Drawing)
3.Quotation offer with the technology document (Quotation PI )
4.Engineering and Manufacturing (Production &Quality inspection )
5. Product inspection (FAT documents)
6. Delivery arrangement and loading work (full set Shipment documents)
7. After-sales service (OQ,PQ ,SAT documents)
1.What about your factory?
Our factory is located in Wenzhou city ,Zhejiang Province and have more than 15 years experience on machinery making.

2.How will your company  control the equipment quality ?
We have a qualified expert team ,we will inspect every production proceed .also Machines will be tested in our plant before shipment .

3.How long the warranty will be?
We provide 1 year warranty for the machine running ,but we will afford whole -life service for the machine .

4.Which kind payment do your company do now ?
We accept Western Union, T/T ,D/P,D/C and irrevocable L/C payable etc.

5.Can  we  become  your distributor in our country?
Yes, we very welcome you! More details will be discussed if you are interested in being our agent.

6.Why we choose "JOSTON "?
1. We enhance the reliability of product's quality and working life . 
2. We decrease the consumption cost of the product in the ruuning. 
3. We improve research personnel's ability to deliver a creative design; 
4. We use leading technologies in our product development and innovation, and thereby increase the competitive advantage of products.

7.Do you supply installation equipment in oversea?
Yes, if need, we can  send our  engineer to your plant to help you do installation and commission.

8.How can we know the order production status ?
We will arrange the person to take photo or video during manufacturing in every  week to make you to know the production status.When goods are finished,we will take  detailed photos or video for your checking ,after approve ,then we will arrange shipment .also you can arrange FAT in our plant when the goods is ready here

9.what is kind service do you offer before making order ?
1.according to your company URS ,we will make the design  drawing accoridingly.
2.after your company approved drawing ,we will make quotation.
3. final we make agreement on payment terms ,delivery time ,package ,shipment etc.

10.how about your company after-sale serivce ?
1. We provide long-term after-sale service. 
2. we can do installation and commission for the equipment in your plant if necessary .
3. Meanwhile, you can call or e-mail us to consult on any relevant question since we have a special line for after-sale service. Alternatively, you can communicate on-line with us to solve any problem.