What is Multiple Agitator Mixing Tank
Multiple agitator mixing tank is used to to dissolve one or more materials (water-soluble solid phase, liquid phase or colloidal substance, etc.) in another liquid phase, and make them hydrate into relatively stable emulsions.
Application scope
1. Food and beverage: dairy products, ice cream, butter ,chocolate, soymilk, juice, jam ,paste etc;
2. Cosmetics industry: detergent, conditioner, shampoo, skin lotion, perfume;
3.Chemical industry: lubricating oil, grease, heavy oil emulsification, diesel emulsification, disinfectant, insecticide,photosensitive latex, rubber slurry, resin paste, thickener, essence, silicon material, carbon black, Magnesium Oxide, titanium dioxide, anti sticking agent, release agent, defoaming agent, sealant, etc.
Working principle
The Multiple agitator mixing tank usually made of two or three type agitator together in the Stainless steel tank ,each agitator have it is own function and purpose for the raw material .
1. Scraper type agitator :which agitator with PTFE scraper which can touch the inside shell wall of the tank can remove the viscosity or paste product from the inside shell wall to avoid the products burn or stick in the wall under heating and cooling .also scraper type agitator have a big fame agitator which can make inside product moveable and make the mixing uniform for the heating or cooling
2. High shear homogenize agitator : which can be installed in the tank top end or also can be installed in the tank bottom end ( it depend on the tank structure ) ,the homogenize agitator functional is that The centrifugal high-speed emulsifying head can produce a huge rotating suction force when it works. The material directly above the rotor is rotated and sucked down, and then it is thrown to the stator at high speed. After the high-speed shearing, collision and smashing between the rotating stators, the material is collected to the outlet and ejected. At the same time, the anti vortex baffle at the bottom of the tank converts the rotating force into the up and down overturning force, so that the materials in the tank are evenly mixed, and the powder is prevented from accumulating and agglomerating on the liquid surface, so as to achieve the purpose of hydration and emulsification.
3. Disc Dispenser agitator :The dispersing disc is an accessory of the high-speed dispersing machine, which is connected to the main shaft of the high-speed dispersing machine. When the main shaft of the disperser runs at high speed, the upper and lower parts of the disperser are rotating, and a turbulent zone will be formed at the edge of 2.5-5mm. The upper and lower serrations of the dispersion plate shear, impact, crush and disperse the materials at high speed, so as to achieve the state of rapid mixing, dissolution, dispersion and refinement
The Multiple agitator mixing tank can make the different agitator combination for the different functions,so we can do it as the product character.
1. Scraper agitator + Disc Dispenser agitator
2. Scraper agitator + Disc Dispenser agitator + top mounted High shear homogenize agitator
3. Scraper agitator + Disc Dispenser agitator +bottom mounted High shear homogenize agitator
4. Scraper agitator + Disc Dispenser agitator + homogenize pump (pump it is used for the circulation )
5. Scraper agitator + top mounted High shear homogenize agitator
6. Scraper agitator + bottom mounted High shear homogenize agitator
7. Disc Dispenser agitator + High shear homogenize agitator
Technical description
Remark :above model just for reference ,we can do according to client's URS
| Model Item |
PTE-50 |
PTE-100 |
PTE-200 |
PTE-500 |
PTE-1000 |
| Tank work volume:L |
50 |
100 |
200 |
500 |
1000 |
| Motor power for high shear emulsifying:Kw |
1.1 |
1.5 |
2.2 |
5.5 |
7.5 |
| Agitator speed for high shear emulsifying :RPM |
0-1440 or 0-2900 |
| Motor power propeller type agitator g:Kw |
0.37 |
0.55 |
0.55 |
0.75 |
1.1 |
| Agitator speed for propeller type agitator :RPM |
0-150 |
| Motor power anchor type agitator g:Kw |
0.55 |
0.75 |
0.75 |
1.1 |
2.2 |
| Agitator speed for anchor type agitator : RPM |
0-45 |
| Inside shell pressure MPa |
-0.1/0.3 (can be done as client's URS) |
| Jacket pressure MPa |
0.15 (can be done as client's URS) |
| If heating by electrical element in the jacket ,the electrical heater power KW |
4 |
8 |
16 |
30 |
50 |
| Jacket heating medium for electrical element |
electrical heating water or thermal oil |
| Jacket type |
Single full jacket |
Product drawings
SERVICE
We have established some overseas agent office to make the after-sales serivce already ,so it can will be service client in fast response .also in our headquarter service team ,there is a expert team which can support client in 7*24 hours .
1. Customer inquiry and consultation (URS documents)
2. Confirmation of treatment plan (DQ documents &PID Drawing)
3.Quotation offer with the technolgy document (Quotation PI )
4.Engineering and Manufacturing (Prodcution &Quality inspection )
5. Product inspection (FAT documents)
6. Delivery arrangement and loading work (full set Shipment documents)
7. After-sales service (OQ,PQ ,SAT documents)
FAQ
1.What about your factory?
Our factory is located in Wenzhou city ,Zhejiang Province and have more than 15 years experience on machinery making.
2.How will your company control the equipment quality ?
We have a qualified expert team ,we will inspect every production proceed .also Machines will be tested in our plant before shipment .
3.How long the warranty will be?
We provide 1 years warranty for the machine running ,but we will afford whole -life service for the machine .
4.Which kind payment do your company do now ?
We accept Western Union, T/T ,D/P,D/C and irrevocable L/C payable etc.
5.Can we become your distributor in our country?
Yes, we very welcome you! More details will be discussed if you are interested in being our agent.
6.Why we choose "JOSTON "?
1. We enhance the reliability of product's quality and working life .
2. We decrease the consumption cost of the product in the ruuning.
3. We improve research personnel's ability to deliver a creative design;
4. We use leading technologies in our product development and innovation, and thereby increase the competitive advantage of products.
7.Do you supply installation equipment in oversea?
Yes, if need, we can send our engineer to your plant to help you do installation and commission.
8.How can we know the order production status ?
We will arrange the person to take photo or video during manufacturing in every week to make you to know the production status.When goods are finished,we will take detailed photos or video for your checking ,after approve ,then we will arrange shipment .also you can arrange FAT in our plant when the goods is ready here
9.what is kind service do you offer before making order ?
1.according to your company URS ,we will make the design drawing accoridingly.
2.after your company approved drawing ,we will make quotation.
3. final we make agreement on payment terms ,delivery time ,package ,shipment etc.
10.how about your company after-sale serivce ?
1. We provide long-term after-sale service.
2. we can do installation and commission for the equipment in your plant if necessary .
3. Meanwhile, you can call or e-mail us to consult on any relevant question since we have a special line for after-sale service. Alternatively, you can communicate on-line with us to solve any problem.
Audited Supplier 
){kind=link}