GMP Stainless Steel Liquid Dissolve Mixing Tank With Agitator
GMP Stainless Steel Liquid Dissolve Mixing Tank With Agitator is used to mix one or several materials together according to the technological proportions. Which can fit pharmaceutical and food industrial GMP & FDA requirement .
GMP Stainless Steel Liquid Dissolve Mixing Tank With Agitator one kind of liquid preparation equipment,it is required for the deployment of the material dissolved in the solvent of the quantitative,reach a certain concentration or content,and the bleaching & filtering process to obtain solution for other proceed,it is in the pharmaceutical industry as syrup solution,water injection,infusion solution,lyophilized powder etc.
| Components Item |
Function and usage |
| CIP spray ball |
Wash &clean tank inside surface and devices automatic ,which should connect to the CIP machine station |
| Vent filter |
Filter air to prevent the bacteria into the tank ,also can release the tank inside pressure. |
| Temperature sensor (gauge) |
Indicate inside tank temperature and PID temperature control with the necessary valve and fittings |
| Pressure sensor (gauge) |
Indicate the inside tank pressure |
| PH sensor |
Indicate the product PH data |
| PO2 sensor |
Indicate the product Oxygen content |
| Level sensor (gauge) |
Indicate the inside tank product level height ,there are have different models :(static) pressure type ,ultrasonic type ,radar type ,glass tube type ,plate sight glass type . |
| Load cell |
Indicate the product weight |
| VFD ( inverter ) |
Control and adjust agitator speed |
| Safety valve |
Release inside tank pressure to protect the tank safety |
| Flow meter |
Indicate the solution inlet and outlet volume |
| Sight light |
Indicate inside tank bright for watching easily |
| Manhole (handhole ) |
Charge solid product into tank ,also can be used for maintenance inside tank components. |
| Sampling valve |
Take inside tank products sample for offline checking |
Model
Item |
PT-50 |
PT-200 |
PT-1000 |
PT-2000 |
PT-5000 |
| Tank work volume:L |
50 |
200 |
1000 |
2000 |
5000 |
| Motor power for high shear emulsifying:Kw |
1.1 |
1.5 |
4.0 |
5.5 |
15 |
| Agitator speed for high shear emulsifying :RPM |
0-1440 or 0-2900 |
| Motor power propeller type agitator g:Kw |
0.37 |
0.75 |
2.5 |
3.0 |
5.5 |
| Agitator speed for propeller type agitator :RPM |
0-150 |
| Motor power anchor type agitator g:Kw |
0.55 |
1.5 |
4.0 |
5.5 |
11 |
| Agitator speed for anchor type agitator :RPM |
0-45 |
| Inside shell pressure MPa |
-0.1/0.3 (can be done as client's URS) |
| Jacket pressure MPa |
0.3 (can be done as client's URS) |
| Jacket heating medium |
Steam/hot water |
| Jacket type |
Single full/limpet coil/dimple jacket /inside coil tube |
Audited Supplier 
){kind=link}
){kind=link}